To proceed with this software, please follow these steps:
- Login to the desktop and open Launch HDD Regenerator.
- In the registration menu, select 'Regeneration' from the first option provided.
- Next, choose the 'Create Bootable Diskette' option within the registration dialog box. This will lead you to a dialogue interface where you need to insert your new 3.5-inch hard disk drive (HDD). Ensure that the disk is brand-new, freshly inserted, and secure by holding it in place before proceeding.
- Aware of potential security concerns, be sure to carefully insert the disk into the disk reader and confirm the operation by pressing 'OK'. The regeneration process may take several minutes, so have patience as it unfolds.
- The screen will display a notification with English instructions guiding you through the process. You can press any key on your keyboard during the process (e.g., 'Continue', 'Enter'), which will proceed to the next step.
- After waiting for the computer to restart, you will notice flashing '0MB' indicators indicating that the repair has begun. Continue following the prompts by using 'Enter' when prompted.
- The software will then load the diagnostic process for identifying possible bad sectors on your hard drive. For example, if XP is selected, type 'chkdsk C:\' and press Enter, followed by 'chkdsk D:\'. Proceed as per the instructions until the corresponding directories are checked.
For instance, after typing 'chkdsk C:\', input 'chkdsk D:\' and press Enter. Repeat the same process in the other respective subdirectories for the 'F:' and 'S:' partitions, according to the remaining sectors present on your HD.
Before allowing the process to finish, perform a simple system check to ensure there are no remaining corrupted files or errors in Windows. This can be done by navigating to 'Start' > 'All Programs' > 'System Tools' > 'Scattermont Tool' or using the built-in Checksum utility in Windows.
Based on the results of the system checks, use the bootable disk image created earlier, typically referred to as 'HDD Regenerator Shell v1.41' with the mentioned version number, to test your PC's hard drive. Use the bootable CD/DVD with the newly created image to access Windows without having to boot from a damaged system.
If any issues arise during the testing phase, try running the following troubleshoot command on the problematic sector(s) to further diagnose and fix potential hardware issues:```sql dx di /t :bad sector ``` - Remember to exit the diagnostic tool after fixing the faulty sectors and then proceed with the Regenerating step using the appropriate command, such as 'regenerate' for Windows or 'dd if=/dev/sda of=BootableCD/disk.img bs=1M' for Linux.
Your final hard disk should now show only healthy sectors, indicating successful repair of the specified bad sectors. If required, install any necessary drivers, patches, or utilities based on your operating system to optimize performance and ensure optimal functionality post-removal of the faulty sectors.By following these steps, you should successfully complete the HDD Regenerator v1.51 installation and establish an effective method to identify and recover data lost due to硬盘损坏, saving time and effort in troubleshooting the issue. Keep in mind that always consult the software documentation for specific guidelines and requirements applicable to your hardware configuration and operating system.